Reply to thread

Message: <blockquote data-quote="slonebuilt" data-source="post: 19579" data-attributes="member: 2131"><p>man u guys r a life saver thanks so much. anyway my machine doesnt have a sender at the end of a small hydro hose, instead it has a sender/sensor switch on the hose coming out of the hydro filter main body. i figure this is the hydro charge pressure switch. there is also a sender/switch on the filter main body. which i reckon is to tell you when filter is dirty. ok now once i pulled the right hand engine cover off, i noticed that on the end of the pressure sender/switch there was a rubber plug that was popped almost all the way off and fluid was running out. i grabbed my handy dandy pen and discovered a allen head screw in the top/end of the sender. the sender says N/C by the wir5e terminals so its evident5ly a normally closed switch. my next ? is being as there was fluid coming out of the sender where yhe allen head screw is then a seal of some sort has blown or malfunctioed somehow. any ideas</p></blockquote><p></p>