Reply to thread

Message: <blockquote data-quote="jerry" data-source="post: 31185" data-attributes="member: 931"><p>Chip, back to my 665 problem, I switched the preheat and start relay that are below the engine room fuse panel with no change, cleaned the ground on the bell housing checked for power at the service switch in run position and at the # 4 spot on the eic board, all good there. After all of this I tried it again with nothing but a light click back by the panel. Got tired of this so I clicked the ignition switch about 10 time or more and it started. Now it seems to me that the starter solenoid has to be good because in service it always kicks in. The starter relay must be good because it made no difference when I switched them. So would you guess it might be the starter interlock relay? It doesn't start all the time first try even now I may have to click it a couple times. Any ideas would be appreciated. thanks. Jerry</p></blockquote><p></p>