Reply to thread

Message: <blockquote data-quote="sgf" data-source="post: 61141" data-attributes="member: 8071"><p>This machine was running fine and I installed a new seat. It is just the padded seat. I never replaced or removed the seat pan. I have the two switches under the seat. The manual refers to as "deluxe seat", because there are two. I removed those and installed them on the new seat. I also reconnected the wires. I never removed the seat belt equipment since it is mounted on the seat pan. When I try to start the machine with my seat belt firmly locked in, the seat belt light flashes. If I switch to maint. mode it starts fine. If I flip the maint. mode switch to run, then secure my seat belt, the machine runs fine and will move, but the bucket peddles stay locked so the bucket can't be moved. All of this seems to point to the seat belt switch doesn't it? I don't see broken wires and it is plugged in. Am I missing the obvious here? I figured I'd ask before pulling everything back apart because it is a chore for a guy my size to try to work in that cab.</p></blockquote><p></p>