Reply to thread

Message: <blockquote data-quote="jerry" data-source="post: 59092" data-attributes="member: 931"><p>Mike10, I redid the gearbox lube system as you described by replacing the lower front mounting bolt with one with a hole in it and adding a 1/2 inch half coupling to the chain case cover 2 1/2 inches up from lower edge to increase oil level.  Have you seen any trouble caused by just using the bolt to maintain the oil level in the case or is there a way to install the funnel system that the ls160 uses to constantly add oil. I have not been able to find any diagrams or pictures of the funnel to see if retrofit would work. thanks</p></blockquote><p></p>