Reply to thread

Message: <blockquote data-quote="Lechbuild" data-source="post: 56678" data-attributes="member: 7706"><p>Hello, I am new to this site, I did a fair amount of research prior to posting. My problem is starting the skid steer, it will start fine but will shut off in a few seconds. I am also reading error code 2. Just like most of the other posts when switched from run to service the skid steer will run fine. I have also encountered some clicking noise, which has been around for awhile. The clicking would also act up and not allow start, of course with turning the key back and forth the machine would start and run normal. Trouble shooting I tested the wire on the fuel solenoid, key on, s/r switch in run, and no power. Next I tried s/r switch in service, key on, and I had power. I do not have a service manual and have been reading on this site for a couple hours. In most cases the interlock relay has been the culpret and or the s/r switch. Any help would be appreaciated. Trouble shooting wiring is not my forte. (Lots of switches and stuff). Thanks Chad</p></blockquote><p></p>