LS180 SKID STEER FILTER LIGHT

[STORM]

I recently bought a 2001 LS180 Skid steer. I used it a couple of days with the change hydro filter light flashing. The fuild looks clean. I installed a new filter but the light still flashes. Will i need to change the fluid? Is there a reset procedure?

 

[Mike10]

Is it the filter restriction light or the charge pressure light? Either way the sender is probably the problem.

 

[STORM]

Is it the filter restriction light or the charge pressure light? Either way the sender is probably the problem.

It's the Hydraulic oil filter light. It monitors the condition of the filter and signals when the filter is dirty and requires replacement. Where would the sensor be and how can I replace it? Thanks

 

[Mike10]

It's the Hydraulic oil filter light. It monitors the condition of the filter and signals when the filter is dirty and requires replacement. Where would the sensor be and how can I replace it? Thanks

The switch is mounted on the hydraulic filter base. It should have one wire going to it.

 

[OldMachinist]

The switch is mounted on the hydraulic filter base. It should have one wire going to it.

 

[STORM]

Thanks. I will replace it.