Reply to thread

Message: <blockquote data-quote="mfyock" data-source="post: 43806" data-attributes="member: 2150"><p>I had a similar problem on an older NH skidsteer. The problem was the belt coupler was worn out. This allowed the selt belt tongue to not always activate the switch in the belt coupler. I replaced the coupler and all was well. Check the coupler by disconnecting it. Now sit in the seat as normal. While sitting in the seat stick a jumber wire in the harner to the seat switch. Now fire up the machine and see if the boom works. If it does then you know you need to replace the belt coupler.</p></blockquote><p></p>