Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
ls180 boom/tilt locked out
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Mike10" data-source="post: 74066" data-attributes="member: 5461"><p>Remove the instrument panel and on the larger connector check if you have power to pin 11, lt green, when you sit in the seat. Then check if you have power at pin 4, tan/white when you fasten the seat belt. You should also have power at pin 14, r/lt green. You also might want to check the ground circuit by seeing if you have continuity between pin 13 and ground. The key should be off when doing these checks...................Are you saying this machine worked properly before this issue? Will the engine start without the seat belt being fastened in both the service position and the run position? It should in service but not in run.</p></blockquote><p></p>
[QUOTE="Mike10, post: 74066, member: 5461"] Remove the instrument panel and on the larger connector check if you have power to pin 11, lt green, when you sit in the seat. Then check if you have power at pin 4, tan/white when you fasten the seat belt. You should also have power at pin 14, r/lt green. You also might want to check the ground circuit by seeing if you have continuity between pin 13 and ground. The key should be off when doing these checks...................Are you saying this machine worked properly before this issue? Will the engine start without the seat belt being fastened in both the service position and the run position? It should in service but not in run. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
New Holland Skidsteer Forum
ls180 boom/tilt locked out
Top