Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 65519" data-attributes="member: 5461"><p>Unless your skid plates under the loader are clean of debris the oil that does leak out will be trapped by the skid plates since the drain holes are plugged.  Whenever you load the machine the loader is at an angle and the oil goes to another part of the machine and if there is an opening it will run out.  If the chain cases are over full then you could have a hydro motor seal leaking.  If the gearbox and chain case are separate reservoirs then generally if the seal leaks the oil will come out the breather of the gearbox which is high up on the gearbox.</p></blockquote><p></p>