Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 89205" data-attributes="member: 5461"><p>If it is the hydro light then the sender is not next to any filter. Raise and latch the seat up. Looking is from the front to the back of the engine you will find the hydro pumps attached to the bell housing plate. Look at the top to the right (looking in from the front) hydro pump and you will see several fitting. One of the fittings has a small black hose attached to it. Follow the hose to reach the sender......If it is the engine light coming on then the sender is by the oil filter on the engine. And yes those have been causing problems......The sender by the hydraulic filter is for filter restriction and not pressure.</p></blockquote><p></p>