Reply to thread

Message: <blockquote data-quote="shepherd" data-source="post: 72764" data-attributes="member: 7978"><p>Thanks for posting all of this as I'm in the middle of piecing my bobtach back together. One bolt came loose while plowing, the pin pushed into the bobtach and out of the lift arm completely. When the whole thing fell loose on one side it broke both bushings in the bobtach and mashed one side of the bushing bore. I found the bolt, pins, and all of the parts but man it's a mess. The pin still fits the taper in the lift arm so at least I don't need to have that reamed. The one bushing that I have intact is a loose fit back into the bobtach. Does anyone know the bore ID so I can figure if my bushing or bobtach is worn. Probably both I know.. I will get out a file and a hone to see how well I can clean the mashed side. There is one gouge that might need to be welded, and then bored back out. I imagine I could figure out some way of securely clamping it under a mill if needed.</p></blockquote><p></p>