Reply to thread

Message: <blockquote data-quote="Ice Cold" data-source="post: 70264" data-attributes="member: 5354"><p>OK, my machine is at the dealer. they do have a reamer. I had the lower arms exposed when I took it in and the taper was wallowed a bit with more play on one side than the other. All in all not in bad shape........just wondering what it will cost. I'll let you guys know. ... I like the idea of spacers/shims to take out the slop of the bobtach. Tazza, I'm wondering why you used nylon, it seems like it would wear out a lot faster than metal. But then maybe it just gets pounded in tighter and tighter to keep the dirt out. ... I am going to put in spacers/shims to minimize the dirt and side to side play. Maybe that will keep the seals from popping off. ... what kind of off the shelf material will work the best? ... Ice</p></blockquote><p></p>