Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 70188" data-attributes="member: 82">Just how much do they wobble? I'd like to put a pin in with the bobtach off, smack it with a hammer to seat it, see if it moves. Get the bolt and knock it out, see how tight it is. Hopefully the movement was just because it was not really pulled into place.A little wear on the pin may not be the taper, it could be a slight bend in the arm or bobtach and running it for a while may bed it in.I'm not sure if the dealer woudl have the reamer, i'd suspect they would though, your machine wouldn't be the only one out there with this issue.</blockquote>