Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 10815" data-attributes="member: 82">A V2203 will fit up exactly the same but they are more powerful. I spoke with the service manager at Bobcat and he said not to use over a V1903 as if you go too high the pumps will over heat and die. Its not that the power available is too high, its because the engine won't bog down and over-stress the pumps. With a more powerful engine you won't notice that you are drawing more out of the pumps than you should be.With that said, its your choice i personally see no problem with the change over as long as you don't push it too hard, but beware that the pump was not designed for the extra power of the larger engine. I don't know if the drive shaft inside the pump is strong enough either.Good luck with your search!</blockquote>