Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 17803" data-attributes="member: 82">I'll have to look up the specs on the rods when i get home.The inverter welder i have is high frequency DC. It can only put out 150 amps but its more than enough for all i need. Its has a pretty bad duty cycle, you can lay down a 3.2mm rod at full power then it will want a rest to cool down.The rods don't lay a really pretty weld, but they sure do cut deep. They aren't smooth running as such, a fair amount of spatter but you just lay one down, give it a clean then lay a nice smooth rod over the top to make it *pretty*.</blockquote>