Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 71175" data-attributes="member: 782"><p>the aux power supply resets when you turn the ignition off and you have to re-energize it after a restart , so if it is on it is either a stuck stem or power is shorted to it all the time and it is in the on position , so I would doubt that is the case , the looped hose with quick couplers attached to the machine will tell you if aux is the problem -----another quick check to do is to remove the hydraulic filter and dump it's contents into a clean container and look for a large dose of metal particles , you could use this incident as a good reason to do the case drain filters also as that would be a good indication of what's going on inside the Sunstrand pump</p></blockquote><p></p>