Reply to thread

Message: <blockquote data-quote="omcMustang" data-source="post: 83779" data-attributes="member: 11917"><p>i tried the aux control back and forth a few times and nothing changed the lever on my right is my throttle there is a T handle in the middle that drives back and forth and turns left and right there are 2 pedals on the floor the right one opperates the bucket and the left one opperates the loader arms with the lever on the left in nuetral or forward the arms will lift and with the lever backwards its supposed to lower.. is there something thats electrical thats supposed to power the aux to turn on? (this is from another forumn) Q: The aux (electric) is not functioning. What should I do? A: 1. First determine if there is power going to the coils on the valve. To do this, with the ignition turned to the "RUN" position (do not start), and the wires unplugged from the auxiliary coils on the valve, test with a test light to see if you have power going to them when you rock the switch on the handle. When you push the switch on one side you should have power going to one coil, and when the switch is pushed to the other side you should have power going to the other coil. If no power is going to the coil proceed to step 2. 2. The next step would be to check the fuse in the fuse box. This is a 10 amp fuse (brown wire with yellow tracer). If the fuse is good proceed to step 3.</p></blockquote><p></p>