Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 41095" data-attributes="member: 82"><p>Depending on how tight it is, you may need to remove the cylinder. Lift the arms high enough to put a block of wood where the arms touch the chain case. Make sure its stable and will not twist and fall. Lower the arms to rest on it. Release the pressure with the knob on the right side of the seat. Put a jack under the arm, just in case it moves to take the slack. Remove the pins and the hoses in the engine bay, slide the ram out and replace the hose.</p></blockquote><p></p>