Reply to thread

Message: <blockquote data-quote="shepherd" data-source="post: 99743" data-attributes="member: 7978"><p>3 possibilities I can think of: It hasn't been used for a long time and the springs/ balls that hold it in the detent are rusted or stuck. Or, someone was working on it before you got it and lost the springs and balls. If you remove the cover without being ready for everything to fly out, those parts fly down into the belly of the machine. Or, it's possible that the right pedal linkage could get bound up, and not give you the full travel to "get" the detent. It's a little past the regular heel-toe movement. FYI, the detent is under the long cap, on the rear end of the bottom spool on the control valve. There's a circlip, that is essentially the grenade pin holding those parts from going airborne. There's also a weep hole that you might get some Kroil or WD40 into, to see if it loosens stuff up. SD</p></blockquote><p></p>