Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 59166" data-attributes="member: 5461">When standing at the front of the loader looking at the seat, look at the right lower rear corner of the cab and you will find the latch which holds the seat down.   It is about 6 back from the seat belt mount.  Once the seat is unlatched raise it up until the support rod catches in the notch to hold the seat up.After the seat is up look towards the back of the engine bell housing.  You will see the two hydrostat pumps that are mounted to the bell housing.  Again looking from the front look at the top of the right hydrostat pump.  You will see two large hoses and two metal lines attached to the top of the hydrostat pump.  The front metal line has several fittings attached to it.  On one of the fittings is for a small hose.  Follow the hose and you will find the switch at the end of the hose.</blockquote>