Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 64944" data-attributes="member: 5461"><p>It sounds like your brother and you have had different problems.  What I don't understand is why oil is coming out around the rubber bushing.  The steel outer sleeve of this rubber bushing should be a press fit in the servo housing.  If the bushing falls into the housing then either the bushing is wrong or as you stated the housing is worn.  As tight as the bushing is supposed to fit in the housing I would think you would not have much of a leak if any even with a hole in the housing.</p></blockquote><p></p>