Reply to thread

Message: <blockquote data-quote="heatpumpproducts" data-source="post: 13109" data-attributes="member: 1332"><p>well i cleaned as many conects that i could find , including the grounds on the engine behind the seat , But unable to reach the temp sensor for the hydrolics exsept to know its covered in muck , the wires are aas well , i'll need to clean it down in the spring . (i opened a new post on how to split the oropes ) i put my aux hydrolics to use for the first time , with my blade . it works all right but it moves aposite to the way my hand does , can it be reversed , by switching the lines , or am i stuck with this . i only bring it up here because the fluid in the aux has not been circulted and i that my be well no change with the lights , except the temperature now changes on the ei panel and the warning lights go away now and then and the filter light flashes and the the alarm peeps but i havent been able to put a patern on it yet . it took litle or no oil in the engine the last time out . and the hydrolic seem to be constant as well . i was thinking that if i had a leak i would have seen a sure drop in the resovoire or sump . would that be true .</p></blockquote><p></p>