Reply to thread

Message: <blockquote data-quote="jerrymack553" data-source="post: 44261" data-attributes="member: 5470"><p>need some help guys. on saturday i started up my 553 and was using it to keep the shale piles orderly on my land as they where being delivered (18 loads) after the 2ed delivery i shut down the machine while i waited for the next delivery. i was out side the machine and reached in and turned off the key and then pushed down the throttle lever to shut it off when i got back in i had no power, no lites, nothing i figeted around with the seat belt connector and the seat switch connector after an hour of doing this and trying to jump these 2 connectors i was able to get the buzzers and the lites back but when i would turn the key,, nothing and it would start all over agin of no power no lites etc. etc. battery is new, fluids are all full. it seems like the problem could be the seat belt switch sometimes when i get in i hafta click an unclick the seat belt to get the lite to go out and start but i'm not sure. i would think with jumping the seat belt connector it would eliminate that switch but it didnt help same with the seat switch and of coarse the boom is down so you cant get into the engine compartment to check anything else. so where do i start guys to find a repair? luckly i just finshed my old dynahoe 160 2 weeks ago so i used that with the shale. thanks for the help</p></blockquote><p></p>