L553 Electrical Issue

Help Support SkidSteer Forum:

BPLC

New member
Joined
Mar 23, 2023
Messages
2
Recently I went to start my New Holland L553 skid steer and after a couple turns of the key to get it to fire all the electrical went dead. No lights or anything come on. The battery is a couple years old but I charged it up and it still shows 12.5v. I traced the power all the way to the key ignition and I have 12v coming into the ignition. I tried replacing the ignition and still nothing. I also noticed after replacing the ignition that when the key is in the on position I no longer read 12v coming into the key ignition but when it's in the off position I do. Any ideas of where to go from here would be greatly appreciated.
 
OP
OP
B

BPLC

New member
Joined
Mar 23, 2023
Messages
2
I checked the 15A breaker. I don't see any other fuses on the wiring diagram. Now that I think about it I think the breaker resets itself so maybe I have a short past the key so when I turn the key it trips and then when I turn the key off it resets?
 

Latest posts

Top