Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 61090" data-attributes="member: 5461"><p>The aux valve shown is not for boom hydraulics where the couplers are out at the end of the boom. In the linked page you need to go up a few lines until you see boom hydraulics. The basic plumbing is the same. You install the power beyond fitting into the present control valve power beyond port. This will supply pressurized oil to what ever control valve you install. You will then need to run a return hose from the return port of the new valve back to the loader control valve and tee it into the return line to the tank. Then it is just a matter of running your two work hoses to wherever you want your couplers located.</p></blockquote><p></p>