Reply to thread

Message: <blockquote data-quote="deaop06" data-source="post: 78494" data-attributes="member: 9135"><p>grandy129, Sorry I didn,t get back to you sooner. Yes my machine has the boom blocks. Lever is on your left side. My plates are 3/8" flat steel on edge. One on each side. they are controled by rods from the lever. I think the parts manuel will show them. I will look and get back to you. I have mine running pretty good. Had to fix the right rear wheel seal. What a job. The seal had cut a grove in the axle. I turned the axle down 1/4" and pressed a home made ring on it then put the new seal on. Have around 50hrs and no leaks from the seal. The left brake came loose and broke the drive chain. That was a bad job. No room to work. I don't have a brake on that side now but never used them anyway. You may have your boom fixed by now but the key has to be turned back one click after you start it or the boom will not work. I forget once in a while. The bucket will tilt all the time. Have fun deaop06</p></blockquote><p></p>