Reply to thread

Message: <blockquote data-quote="mark18mwm" data-source="post: 92792" data-attributes="member: 9306"><p>To time it with those marks, the way I do it is start it up with a timing light on #1 plug wire. rev it up to about 3/4 throttle (you do this to make sure the centrifugal advance in the distributor is fully advanced). loosen the distributor clamp bolt just a bit. Turn the distributor (slowly) until the timing marks line up with the timing light. Then tighten the distributor clamp and you should be all set.</p></blockquote><p></p>