John Deere 325

[Robert Paben]

I have a John Deere 325, wheel machine, cab, heat, A/C, standard flow hydraulics with auxiliary outlets, with the exception of a case drain return.
All the motor attachments I look at require a case drain.
Can I put a case drain on my machine and where can I find parts to do so. I've looked and have had no success. Yes I've contacted the Dealer.

 

[Equipment_Tech]

Depending on your attachments some required case drain or you can damage the motor on the tool/attachment

If your machine is not equipped with case drain at your aux fittings

You'll need to install power beyond valve
and run an additional line to you aux valves on the front of the boom arm

The additional hydraulic line is going to a valve and then to case dain

To purchase these kits, call your local dealer, the kind that deals with hydraulic attachments lol

The kit is not too hard to install but recommend dealer installation

 

[Equipment_Tech]

Depending on your attachments some required case drain or you can damage the motor on the tool/attachment

If your machine is not equipped with case drain at your aux fittings

You'll need to install power beyond valve
and run an additional line to you aux valves on the front of the boom arm

The additional hydraulic line is going to a valve and then to case dain

To purchase these kits, call your local dealer, the kind that deals with hydraulic attachments lol

The kit is not too hard to install but recommend dealer installation

Please disregard the power beyond, you do not need power beyond

I'm getting it confused from my last job when I install a case drain for stump grinder and power beyond for the hydraulic quick attached on excavator

My mistake