- Joined
- Apr 19, 2015
- Messages
- 34
I ended up with a 2012 John Deere 320D The engine was literally in a basket. Big hole in block. Found another block and it was seized. Made one out of two but I have no idea how to hook the fuel back up. It has a manual fuel pump and a water separater/filter with a pump on top. pump is on rear of block and above it there is a fitting that has a fuel hose coming out of the rear of the block. There is another fitting coming out of the block to the front of the block. I ran a hose to the pump from the filter. The pump has an arrow on it showing flow. I hooked it up and hooked the out flow to the fitting on the back. Fitting on the front I ran to fuel tank return line. is this correct. Been pulling my hair out for a week or so. Won't start. can't find andy flow charts or pictures of the lines so I can figure it out . Got manual but it shows nothing. thanks
