JIC Cap/Plug Size for 763 Case Drain Filters

[bcatter64]

I'm going to change my case drain filters on a 763F for the first time and don't want to lose all of my hydraulic fluid. Does anyone know the size of the JIC plugs/caps that are needed to seal off the lines during the process? Thanks in advance for the help

 

[reaperman]

I replaced my 753 (basically the same as 763) case drains without plugs and lost very little oil. Just keep the lines lifted upwards a bit.

 

[bobbie-g]

I replaced my 753 (basically the same as 763) case drains without plugs and lost very little oil. Just keep the lines lifted upwards a bit.

I bought a spare filter housing, so when I change the filters I have one ready to put in soon as I pull the old one. Then I replace the filter element in the removed housing, and it's ready for the next filter position. But I don't find that I lose much oil during the process. And I finally bought a set of JIC plugs and caps so I'd have whatever I needed for any line on the machine. ---Bobbie-G

 

[Bswwood]

To answer the question they are #6 JIC

 

[bcatter64]

To answer the question they are #6 JIC

Thanks