Reply to thread

Message: <blockquote data-quote="geroy69" data-source="post: 85868" data-attributes="member: 12187"><p>Hello everyone, I need a little help, here is my problem I have 2006 JD ct322 bought it lest year, never had any problems and i never use the auxiliary, few days ago I hooked up a grapple bucket and unlock the auxiliary handle, well the handle didn't move up or down, so i think it was seized because nobody ever use the auxiliary on it before, so I remove the cover plate and located the lever to the hydraulics and I push the lever with the pry bar and it moved, so I spray some WD40 on it and now it moves up and down very easy, so I figured I've got a problem fixed, well now when I want it to star, it started but is stalls after 5 seconds so I tried again and same thing it starts with no problem and it stalls after 5 seconds. Ok so I clean the separator, replace fuel transfer pump, clean all the fuel lines, checked the solenoid and even did the by pass on the separator and check the glow plugs relay, so it still doing the same starts with no straggle and stalls after 5 seconds and I notes that when the engine stalls after 5 second the fuel solenoid clicked after the engine shuts off. Please any suggestions will help. Thank you.</p></blockquote><p></p>