Reply to thread

Message: <blockquote data-quote="mrdeere1959" data-source="post: 50365" data-attributes="member: 6420"><p>One problem I see with many non bobcat hyd tools is that most bobcats have a lot of back pressure. To get around this the return line needs to be run direct to tank. Sounds simple but most people never bother to but a filter in this return line. If the tool being run should self-destruct with out a filter the contaminants go right to the pumps. Bobcats filter the oil on the return side not the suction side.</p></blockquote><p></p>