ISO Case 1835 drive motor commutator

[tlmromaniuk]

This is for the original wheel drive motor that came in the unit. I don’t know much about the machine as it was disassembled when I got it and I figure this is what it was not put back together would like to see what works and why dose t befor spending money on a set of drive motors. If you have a bad motor All I need it the commutator. Good used motor for a fair price. Part number Commutator Case number : D60857 Motor Case number : D127145 Thanks in advance Tyson

 

[Gearclash]

If the motor was disassembled and not stored properly it may be ruined. Any amount of rust is bad news. I’ve been in those motors a few times. Look for scratches on the flat surfaces of the commutator. It doesn’t take much scratching to make the motor a bit jerky. Usually what gets those motors is output shaft seal leakage. The seal wears out and wears a groove in the output shaft as well. I used to replace the seal and the output shaft, anymore I just put a new motor in. you can put just one new motor in. Old motor was a Ross TRW, new motor through Case is a Parker.