Reply to thread

Message: <blockquote data-quote="StuZ" data-source="post: 998" data-attributes="member: 19"><p>This is stickly for the aux. contolled attachments. The pressure is however rated at 3300 psi. As most of you know, a hyd. hose made 5 years ago was probably only rated at 2500 psi !! Most of your hoses will have a rating on the hose. As always on any Bobcat or attachment, use no less than 2 wire hose if made from a bulk source. If you have a friend on your local Fire Dept., you might ask them for an old piece of a 2" water hose. Then use it as a sleeve over the hoses coming off your couplers on your attachment.</p></blockquote><p></p>