Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 26690" data-attributes="member: 82">Most machines do not have a drain plug, you need to crack a line and let it drain out. You will not get all the oil out as its still in the lines, cylinders, motors and pumps. I drain mine from the aux hydraulic ports, run the machine at idle operate the hydraulics till you can hear it jitter and the oil is foamy, shut down, re-fill and then operate it to get the air out.If you just open a line, you will get less air in the system, you will need to fiddle around to find one that allows you to remove most of the oil, not the easiest job sad to say.</blockquote>