Reply to thread

Message: <blockquote data-quote="matt681" data-source="post: 57494" data-attributes="member: 7797"><p>Thanks for the help guys, I ended up making a tool out of 50x3mm flat bar, drilled a 16mm hole in the plate filed the hole out bigger since I didn't have a bigger drill bit, cut too the out side of the hole to make the c part, run a strip of wield down either side and ground it too a wedge, didn't look any thing fancy but got the job done for nothing. I went back too my local dealer, since they were a pain in the ass to deal with over the phone. I went and spoke to the spare parts guy who was great, printed off the cut away photos, gave me a seal kit for nothing and the steel insert and spring washer thing, got it all back together and not leaking<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /> then spent 2 hours and 10 liters of degreaser too got all the oil off the machine.</p></blockquote><p></p>