Jul 7, 2014 #2 B bob99cat Member Joined Jul 7, 2014 Messages 22 i sprung a leak in the hard piping on the arm cylinder where can i get the new hard line? ive tried all the local parts centers and no one carries 1/2" line.
i sprung a leak in the hard piping on the arm cylinder where can i get the new hard line? ive tried all the local parts centers and no one carries 1/2" line.
Jul 7, 2014 #3 A antfarmer2 Well-known member Joined Oct 28, 2013 Messages 2,801 Take it to a local hydro shop they will make one cap off the open ports to keep clean
Jul 7, 2014 #4 T Tazza Moderator Staff member Joined Dec 7, 2004 Messages 16,839 antfarmer2 said: Take it to a local hydro shop they will make one cap off the open ports to keep clean Click to expand... If you have a friend with an oxy set, they could braze up the worn spot. I have done it many times on machines i have gotten with leaks like this.
antfarmer2 said: Take it to a local hydro shop they will make one cap off the open ports to keep clean Click to expand... If you have a friend with an oxy set, they could braze up the worn spot. I have done it many times on machines i have gotten with leaks like this.