Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
How to disengage the parking brake/traction control? 963C
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="rock_rat" data-source="post: 129117" data-attributes="member: 23666"><p>I have a new-to-me inop (engine doesn't run) 963C. It was lifted onto my trailer by a wheeled loader, and I'm trying now to remove it from the trailer so I can work on it. Per the manual I have removed the valves from the drive motor assemblies on either side, and did the manual override for the traction control. I connected a porta-power to the traction control box under the cab, and pumped it up to at least 350psi. </p><p></p><p>With one side lifted off the ground I can get the wheels in the air to rotate ~1/4 turn by hand with significant resistance, then the pressure seems to bleed down and I cant move the wheels anymore. I repump up the porta-power and I can get about another 1/4 turn. I would have expected the wheels to turn freely with the porta power engaged, and I don't know that I'm going to be able to pull it off the trailer like this. </p><p></p><p>Am I doing something wrong? Do I have the wrong expectation and this behavior is normal? Is something failing internally? Pls help <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite3" alt=":(" title="Frown :(" loading="lazy" data-shortname=":(" /></p><p></p><p>[ATTACH=full]4623[/ATTACH]</p></blockquote><p></p>
[QUOTE="rock_rat, post: 129117, member: 23666"] I have a new-to-me inop (engine doesn't run) 963C. It was lifted onto my trailer by a wheeled loader, and I'm trying now to remove it from the trailer so I can work on it. Per the manual I have removed the valves from the drive motor assemblies on either side, and did the manual override for the traction control. I connected a porta-power to the traction control box under the cab, and pumped it up to at least 350psi. With one side lifted off the ground I can get the wheels in the air to rotate ~1/4 turn by hand with significant resistance, then the pressure seems to bleed down and I cant move the wheels anymore. I repump up the porta-power and I can get about another 1/4 turn. I would have expected the wheels to turn freely with the porta power engaged, and I don't know that I'm going to be able to pull it off the trailer like this. Am I doing something wrong? Do I have the wrong expectation and this behavior is normal? Is something failing internally? Pls help :( [ATTACH type="full" width="732px"]4623[/ATTACH] [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
How to disengage the parking brake/traction control? 963C
Top