Reply to thread

Message: <blockquote data-quote="sam-tip" data-source="post: 62042" data-attributes="member: 8065"><p>I just finished converting my A300 to high flow plus cooling upgrade. Not as bad as others have preached. The hardest part was removing the muffler and installing the muffler. No room plus the bolts have lock tight on them. I made the pump removal harder than it should be because I did not want to drain the AC. So that was little tight. I did not realize to upgrade the cooling fan there would be welding and cutting. The fan is much larger so I had to cut a larger hole for the fan. I did have to go to Northern Tool to get a very large wrench. I needed up to a 1 5/8 inch wrench and socket. I only had up to 1.5 inch The biggest hydraulic fitting was 1 ½ inch. A must is a parts and service manual. I just took my time and it came together. I did it over about a 3 week period. I did pick the wrong time to do it. With 13 inches of snow in one storm I would have liked to have used the A300 to move all the snow. I got the pump from LPS an advertiser of this website Doug</p></blockquote><p></p>