Reply to thread

Message: <blockquote data-quote="DANNP" data-source="post: 14517" data-attributes="member: 1610"><p>Just browsing through and noticed the float position on the pedals I know when I articulate up and reach the end of the cylinders the engine dies a little will it do this if you have the float position forward on the left pedal on mine is bucket down would it not turn the bucket fully before going to float mode . I also ask because my machines pedal linkages are worn and there is no floor boards so you have to stand on the pedals to work inside the cab and I noticed that the left pedal stuck down but I thought it was linkage bind. sorry for interrupting the 3 pt adaptor post.</p></blockquote><p></p>