Hi, I have a T180 that has just stopped moving, when I turn the key the traction light blinks once every few seconds and it shows a 16-07 code (Traction lock hold solenoid open circuit), I've replaced the solenoid and the relay, the connector to the solenoid shows 12v and and 30A fuse is good as well as there being continuity on the ground side to the chassis. The new solenoid reads 9.6ohm resistance, the service manual says 9.8 is good.
At this point I'm lost and really need to find answers. Thank you
At this point I'm lost and really need to find answers. Thank you