Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Help!! S185 Bobtach Plate Removal
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="skidsteer.ca" data-source="post: 37378" data-attributes="member: 307"><p>Put the big bolts back in and leave them a full 2 turns loose from finger tight.</p><p>Remove the grease nipples for the pins that the large bolts hold in.</p><p>Slap the ends of the bolts(the head) hard with a 2lb or larger hammer, driving the head back tight against the boom. Then loosen the bolts and continue to push the bolts in. Grease should be coming out the holes you removed the nipples from. You will have to push each pin in about 3" to release the pin from the arm.</p><p>Note you will need a longer bolt with the same thread in install the pins back into the loader arms. Also be sure to torque these bolts several times afteryou put the loader back into service to ensure the tapered pin has seated into the loader arm and is not working / shifting and wearing the arm out.</p><p>Ken</p></blockquote><p></p>
[QUOTE="skidsteer.ca, post: 37378, member: 307"] Put the big bolts back in and leave them a full 2 turns loose from finger tight. Remove the grease nipples for the pins that the large bolts hold in. Slap the ends of the bolts(the head) hard with a 2lb or larger hammer, driving the head back tight against the boom. Then loosen the bolts and continue to push the bolts in. Grease should be coming out the holes you removed the nipples from. You will have to push each pin in about 3” to release the pin from the arm. Note you will need a longer bolt with the same thread in install the pins back into the loader arms. Also be sure to torque these bolts several times afteryou put the loader back into service to ensure the tapered pin has seated into the loader arm and is not working / shifting and wearing the arm out. Ken [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Help!! S185 Bobtach Plate Removal
Top