Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Help My 743 Won't Start !!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="Tazza" data-source="post: 15522" data-attributes="member: 82"><p>Check your bleed valve on the injector pump. Open it up, squeeze the primer bulb till you feel that its firm and you can feel it squeezing the fuel through, this way you know the system is primed. Ensure you close the bleed valve or the injector pump will not have enough fuel to deliver to the injectors. You haven't touched anything that could cause this issue.</p><p>The only other thing is the engine stop lever, it is not in the stop position? i know you had to remove it to do the axle seals, it *may* not be quite in the rite spot to let the arm fully move to the run position. Even small amounts of oil in the cylinders will make it puff white smoke, but if there is a cloud of smoke it could be your glow plugs. As you said it was running for 30 mins i don't think thats an issue!.</p><p>If not, you have my e-mail, i can try and think of more things that it could be.</p></blockquote><p></p>
[QUOTE="Tazza, post: 15522, member: 82"] Check your bleed valve on the injector pump. Open it up, squeeze the primer bulb till you feel that its firm and you can feel it squeezing the fuel through, this way you know the system is primed. Ensure you close the bleed valve or the injector pump will not have enough fuel to deliver to the injectors. You haven't touched anything that could cause this issue. The only other thing is the engine stop lever, it is not in the stop position? i know you had to remove it to do the axle seals, it *may* not be quite in the rite spot to let the arm fully move to the run position. Even small amounts of oil in the cylinders will make it puff white smoke, but if there is a cloud of smoke it could be your glow plugs. As you said it was running for 30 mins i don't think thats an issue!. If not, you have my e-mail, i can try and think of more things that it could be. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Help My 743 Won't Start !!
Top