HELP - Bobcat S300 - won't mve!!!

[rodbuilder]

A friend of mine has an S300 that runs, but won't move. He seems to think that it's the key pad, or what you and I would call the gauge panel. I'm very familiar with the stupid "traction lock" crap on these things, but can someone tell me how the key panel could be the culprit on this thing? Also - IF it's the panel what will this cost me from Bobcat, and does anyone know where I can get it used? I'm aware of AllSates and Worthington in Wisconsin, but they are both closed as I write this. This is ALL the information I have on this, at this time. It's too far away from me or I'd go play with it.

 

[[email protected]]

with the seatbar up, if you hit the traction lock overide button will it move? the arms wont move but it should still roll. if so, maybe its the magnets in the seat bar?

 

[farmshop]

with the seatbar up, if you hit the traction lock overide button will it move? the arms wont move but it should still roll. if so, maybe its the magnets in the seat bar?

Seat bar up if you push traction lock it should move. Any codes? Have you checked fuses? What system bics or advanced keyless? If bics what do the lights do