Reply to thread

Message: <blockquote data-quote="mrbb" data-source="post: 98789" data-attributes="member: 13825"><p>OK thanks heading there now to go see what I can find I will open the fill hole and see what color oil is and what it looks like, I know what water in oil looks like, so I am OK there with that stuff. IF I was to back the machine up on a block, I would chuck the wheels on both side, I am the better safe than sorry type! than taking risks, and wasn't planning to go too high on the rear if I did, just enough to maybe get oil to drain more towards the front of machine! so, if drain plug doesn't come out, maybe could suck out with the hand pump?? Since water is heavier than oil, I would think if I got a line into the bottom and sucked, I would get most water out, or hoping so, if again drain plug doesn't come out easy! I am hoping its NOT water in the gear box BUT if so, my question would be, if I replace all new oil in system, doesn't it flow thru gear box, and maybe possibly mix it up so, a second or third drain would maybe get it out?? or back to water being heavier and it would just sit on the bottom of the gear box?</p></blockquote><p></p>