Anyone help me figure out in lamen terms how to reinstall my carb it's been 10 days and I should of took pictures I know how it attaches to the block or intake but the choke cable , I don't know where the spring attaches or the throttle rod I should of taken pictures, any help would be awesome, been looking on internet and can't find anything.
Help Support SkidSteer Forum:
- Joined
- Nov 9, 2023
- Messages
- 105
Below is a quick video from my 642 with the ford 1.6 Kent motor. It was too big to post in the forum.
Hope it helps. If you need more info, let me know.
Hope it helps. If you need more info, let me know.
Okay I'll be watching it tomorrow what I'm having trouble with is the choke cable and the spring, I've got it installed, I didn't wanna do it that way but figured might be easier to figure out the cable,
What is that little bracket for?I took this stuff off thinking I'd remember but I don't, so if the bracket doesn't do anything major it's fine off, kinda like the belt guard I don't use the skid for work just light projects around the house.
- Joined
- Nov 9, 2023
- Messages
- 105
Let me look tomorrow. It does not ring any bells
- Joined
- Dec 17, 2009
- Messages
- 209
This is a lifting lug where you hook a lifting chain/rope when hoisting the engine.
- Joined
- Nov 9, 2023
- Messages
- 105
Ok thank you
Yeah I'm trying to figure out the choke cable with spring to butterfly
- Joined
- Nov 9, 2023
- Messages
- 105
