EZ EH Control Setting

[Prospect]

Hi, I've had a new Case SV250 for a few months now. Nice Machine, but I find The settings for the EZ EH controls to be difficult. Difficult in that I've tried and Timed every setting for the loader and even at idle every setting times out the same. It has the standard pump. The speed it moves is rather shocking. Dealer has checked it and says it's fine. I've got it currently set at low but I swear I could throw a bucket of gravel right over the roof. Only slight exaggeration. Am I missing just how these settings effect the controls. Thanks for any advise. John

 

[Prospect]

To answer my own question. The EZ EH settings don't change oil flow. They change the sensitivity of the control sticks. The Low setting requires more movement of the stick to move anything. Handy when your bouncing over rough ground. Be handier if there was a little more resistance to moving the sticks though. John

 

[Tazza]

To answer my own question. The EZ EH settings don't change oil flow. They change the sensitivity of the control sticks. The Low setting requires more movement of the stick to move anything. Handy when your bouncing over rough ground. Be handier if there was a little more resistance to moving the sticks though. John

That makes sense, with super sensitive steering levers, every bounce gets amplified toi shake you around even more.