Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 20138" data-attributes="member: 307">On the es2000 model its not necessary to remove the auger.  The fan is held to the hub with 4 lug nuts (taped nuts) You can unbolt the fan from the hub by removing the 4 lug nuts. Then remove the big nut that hold the hub to the fan motor. You need a puller to remove the hub from the shaft as its on a taper. The you can unbolt the motor and disconnect the steel lines and remove the motor to change the seal.I think your model should be the same. I'll talk to the factory and see what else I can find out for you.Ken</blockquote>