Reply to thread

Message: <blockquote data-quote="robmints" data-source="post: 33777" data-attributes="member: 1353">Hi all.  I am getting an FOA error.  I am not getting power to the solenoids.  I have checked the solenoids and they read 18 ohms.  I have good continuity to ground from the black wire.  I do not have good continuity on the pk/ltbl wire between the switch and terminal 3 on the eic.  it is kind of fuzzy and does not ping the meter.  I bought the manual off tradebit and it has wiring diagrams of most of the curcuits but not the boom/bucket solenoids and I do not want to cut all the wrapping off the harness to see where the wire goes.  Where does the wire go between the time it leaves the solenoid and gets to the eic?  Either the wire is bad (mouse maybe) or I'm losing connection in a switch or relay someplace but I can't find where it goes. I can see that whole section of harness except where it goes behind the back window (took the fender and headliner bracket off) and it all looks perfect.  If I run a wire from power to the solenoids everything works perfectly except for the error, and solenoids have been taken out and look fine and function fine. Many thanks for the help.</blockquote>