Reply to thread

Message: <blockquote data-quote="6brnorma" data-source="post: 53659" data-attributes="member: 5914"><p>It is a pump I get at NAPA part #P60504 about $60.00. It's a rotary pump rated at 2.5 PSI so no flooding problems (the VH4D calls for 2-3 PSI) It comes with a mounting bracket that has a single bolt.....I just made a bracket on the side wall of the machine coming off the upright and mount the pump there with rubber line to the carb (We run M-610s). Filter pre pump. I wire to the accessory terminal off the ignition (I'm no electrician). I've tried a number of pumps through the years.....most weren't worth a plug nickel but two worked well....one has been discontinued, this one is great. I've got 3 or 4 on machines that have literally run for 8-10 years....thousands of hours and still running.....I'd never have a manual pump on one of these machines again. I take the manual fuel pump gasket, make a cover out of 1/8th flat stock then use the old fuel pumps to throw at speeding neighborhood teenagers <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile    :)" loading="lazy" data-shortname=":)" /></p></blockquote><p></p>